六合在线网

水性木器漆用乳液THYOSIL E1596(木器瓷漆)

 

水性木器漆用乳液THYOSIL E1596


THYOSIL E1596

 Self cross linking acrylic polymer自胶联丙烯酸乳液(家具面漆,瓷漆用)

 Description 描述

 THYOSIL E1596 is an acrylic emulsion polymer recommended for manufacturing of interior enamels and wood coatings.

是丙烯酸类乳液聚合物,推荐用于配制室内瓷漆和木器漆。

 Advantages 优势

ü       Excellent adhesion to the substrate.优异的附着力

ü       Low Grain Raise低晶粒提升

ü       Low Odour  低气味

ü       Non-Flammable 非易燃

ü       Excellent Flow and Levelling 优异的流平性

ü       Outstanding UV Resistance 突出的抗紫外线特性

ü       Very good gloss 非常好的光泽

ü       Excellent hardness and chemical resistance卓越的硬度和耐化学腐蚀性能

 Typical properties 典型值

 These properties are typical, do not constitute specifications

 Appearance外观
 
White bluish emulsion蓝白乳液
 

Solids (%)固含量
 
41
 
pH
 
7,5
 

Viscosity a 25oC (cP)粘度
 
300
 

MFFT (oC) 成膜温度
 
28
Starting formulations using THYOSIL E1596应用基础配方 
 
  

WHITE GRINDING白料(色浆)

Raw material 原料

(%)

Water

18,05

Dowanol DPM 二丙二醇甲醚

1,06

Butyl Glycol 丁基乙二醇

6,54

THYON PH730*  中性树脂溶液

PH725树脂的31.5%的氨水溶液)         2,89

NH4OH (25%)  氨水

0,44

Wetting agent 润湿剂

0,62

Antifoam消泡剂

0,62

Pigment - TiO2 -钛白粉

67,63

Water

2,15

Total

100,00

*Ammonia solution of resin THYON PH725 (31.5%)

 

HIGH GLOSS WHITE ENAMEL高光白色珐琅

Raw material原料

(%)

THYOSIL E1596

64,85

White grinding 白料

23,25

Dowanol DPM二丙二醇甲醚

1,51

Butyl Glycol 丁基乙二醇

9,30

Antifoam  消泡剂

0,05

Water

0.89

NH4OH (25%) 氨水

0,05

Wetting agent 润湿剂

0,10

Total

100,00


Application 应用

·         A smooth surface is obtained by sanding the wood with #150-320 grit sandpaper. 用# 150 - 320砂纸把木头的表面打磨光滑。

·         A first layer of sealer is required. We suggest a sealant based THYOSIL E1594. 第一层底漆,我们推荐用E1594

·         Let dry the sealant for 20 minutes, sand the surface with #320 grit sandpaper. 让底漆干 20分钟后,用 #320砂纸 然后再使用# 320砂纸打磨。

·         Allow the layer to dry 2 hours before re-coating.

·         预涂的底漆干后2小时后再上一次漆

·         When the previous coat has dried, recoat with another layer.

·         当先前的涂层干后再涂另一层。

·         A minimum of two coats is suggested; allow the coating to dry 24 hours before use. It is recommended to wait 7 days before performing the quality tests.建议至少涂2遍,在使用之前需干燥24小时以上。建议7天后测试性能品质。

Test测试

Result结果

Ø       Drying Time (at  25°C and 50%  relative humidity) 干燥时间

3 hours   3小时   

Ø       Water Spot 水滴

Good

Ø       Resistance to household chemicals 家用化学品

Very Good 非常好

Ø       Gloss ( Glossmeter 60°))亮度 60°角

76   

Ø       Blocking Resistance (dry 24 hours) 抗黏连性

Excellent非常好

Ø       Hardness (ASTM D3363)硬度

Ø       Adhesion (ASTM D3359)附着力

3H                     

Excellent 非常好  

Ø       Levelling (dry 24hours) 流平性

Very Good 非常好

Ø       Sand between layers (dry 24 hours, #320 grind sandpaper)

Ø       24小时后,用320号砂纸打磨

Very Good 非常好

Ø       Recoat (Old alkyd varnish) 重涂(旧的醇酸漆)

Excellent优异
















Formulation tips 配方技巧

 » Coalescent and Co-solvet effects:成膜助剂(聚结剂)和成膜溶剂的作用

 The type and level of coalescent in the formulation is critical to the balance of properties.

 成膜助剂(聚结剂)的类型和添加量的在配方中对性能的好坏是至关重要的。

 » Wetting and dispersing agents: Like coalescents, the type and level of dispersant will influence the property balance of enamels and wood coatings based on THYOSIL E1596 resin. 润湿分散剂的不同型号的选取将影响瓷漆在木器上的特性

 » Defoamers消泡剂: Foam control is a major concern in waterborne coating formulation design. Additives are necessary to eliminate foam during manufacture and on application. The choice of defoamer type and level will depend primarily on the formulation and mode of application. Deeptone formulations for airless spray application, which use predispersed colorants, will require the most potent defoamer package. Brushing formulations with in-house, factory-dispersed dry pigments will require less.

A good start in choosing the right defoamer package is to have a silicone type in the grind followed by a nonsilicone in the letdown. Effectiveness of the defoamer can be screened by the shaker test, but the best candidates should be checked by actual application.

Drawdowns should also be done to check for surface defects and impact on gloss. Defoamer persistence should be checked by oven aging and retesting the defoaming capabilities.

 泡沫控制是水性涂料配方设计中的主要问题。助剂是需要在生产和应用消除气泡的。消泡剂的型号和添加量的选择取决于配方和使用方式。无气喷涂施工的深色调配方,它使用预分散的着色剂,消泡剂包将需要最有力的。室内刷涂的配方,工厂干颜料分散将需要较少的消泡剂。

在选择合适的消泡剂包是一个良好的开端,硅研磨,然后由非硅调漆。的消泡剂的有效性可以通过振动试验筛选,但实际应用中,应检查的最佳的方案。

施工时也应做检查表面缺陷和对光泽度的影响。消泡剂的持久性,应检查烘箱老化和复验的消泡能力。

Safe handling Inion

Before using this product, read carefully the Material Safety Data Sheet (MSDS).

Important: Avoid freezing. 注意:避免冷冻。

© 幸运飞艇7码公式twotoroam.com 幸运飞艇7码公式twotoroam.com版权所有·青岛琳可工贸有限公司   备案/许可证编号:鲁ICP备09036166号-2
地址:青岛市福州南路19号泛海名人广场4号楼603室      电话:86-0532-85788390      EMAIL:info@diransa.cn     
友情链接:幸运飞艇  幸运飞艇官网  幸运飞艇平台  幸运飞艇5码公式  幸运飞艇冠亚和怎么对刷  秒速时时彩平台  

免责声明: 本站资料及图片来源互联网文章,本网不承担任何由内容信息所引起的争议和法律责任。所有作品版权归原创作者所有,与本站立场无关,如用户分享不慎侵犯了您的权益,请联系我们告知,我们将做删除处理!